Surfing Dirt Mountainboarding

Mountainboarding Community Forums, and Information

How to remove/attach Matrix Trucks

SurfingDirt Crew | November 12, 2009

Original Tutorial by SurfingDirt member Dom Etchells
Part 1: Removing the truck
1. Loosen off your springs as loose as they will go, but do not remove the tension springs… you will need these when re attatching the trucks.

2. Loosen off your bolts to half way, then remove the bolts with you fingers, while holding the truck [...]

How to replace your MBS Matrix “Top Trucks”

SurfingDirt Crew | November 8, 2009

By SurfingDirt.com poster Dom Etchells
 1. Using a 3mm Hex key loosen off your egg shocks as loose as they will go and remove them. (you may find it easier to remove the whole pin)

2. remove your truck. DO NOT take one bolt out at a time, do them in quarters or the nut will raw [...]

A Mountainboarder’s Closet

McCarver | October 30, 2009

Inspired by my new shirt from DirtStarArmy I decided to document my remaining mountainboarding shirts that I have accumulated over the years.

How To Clean Mountainboard Bearings

SurfingDirt Crew | October 24, 2009

Posted by DirtBlogger
It’s a fact of life that clean bearings roll smoother, are faster and will last longer than dirty bearings, dirt and grit can cause small pits in the balls and make for an un-even and generally poopy ride. Use the following steps to keep your bearings rust-free and your wheels spinning freely.

Springless Channel Kit Review

SurfingDirt Crew | October 23, 2009

Review by Mikael
 

It’s not often that there are new trucks in the news, but a few weeks ago I received a new “Springless Kit” developed by veteran MBS Rider Leon Dove of the UK. The kit consist of a few parts which are used to modify an MBS Matrix(or knockoff) for use without springs.

Jereme Leafe Interview

SurfingDirt Crew | October 23, 2009

SurfingDirt recently had the opportunity to have a little chat with nine-year mountainboarding veteran and the winner of the 2009 U.S. Mountainboarding Nationals, MBS Pro -rider Jereme Leafe, who has just recently returned from his mountainboarding road trip across Europe. For most rider’s Jereme Leafe is a quote/unquote “House-hold name” thanks in part to the 2006 [...]

How to do Mountainboard Stretches

SurfingDirt Crew | October 22, 2009

Originally posted by DirtBlogger
 

Ground Industries “Crossair” Review

SurfingDirt Crew | October 22, 2009

review by stlmtboarder
 

Ground Industries Talon Review

SurfingDirt Crew | October 15, 2009

review by stlmtboarder

Australian Mountainboarding Champs 2009 Results

SurfingDirt Crew | October 15, 2009