Nompa Bushing Holder

Board building, design, technical innovations and new equipment. Post and discuss your latest creations, ideas, designs and builds here(Pictures not required LOL)

Moderator: BgSurfer

Post Reply
User avatar
mario64
Posts: 595
Joined: Wed Sep 14, 2011 2:21 pm

Nompa Bushing Holder

Post by mario64 » Tue Sep 30, 2014 12:31 pm

Hi, I'm making a nompa and i was wondering about a couple of things.
Firstly what plastic would be good to make the bushing holder from? one thats strong enough, light and cheap. Also how thick should i make it, or is that something that can be changed to adjust resistance? and finally where would be a good place to get it from?

User avatar
Daleyg3
Dirty
Posts: 219
Joined: Sun Feb 03, 2013 1:38 pm

Post by Daleyg3 » Wed Oct 01, 2014 4:10 am

I used Tesco chopping board.. £1 and thick enough! Make sure you have the 35mm drill bit.

User avatar
mario64
Posts: 595
Joined: Wed Sep 14, 2011 2:21 pm

Post by mario64 » Thu Oct 02, 2014 4:41 am

i dont have a chopping board so i bought some 4mm acrylic from amazon for a fiver, should look cool as its clear. I don't have a 35mm drill bit, but i hope there's one at college. i finished my work early so now i can bring in and make whatever. so i'l bring in my trampa and leave with a nompa. hopefully

User avatar
varun
Noob
Posts: 34
Joined: Sat Feb 21, 2015 12:34 am

Post by varun » Fri Feb 27, 2015 6:02 am

What are you trying to say...........

Post Reply

Return to “The Shed”

Who is online

Users browsing this forum: No registered users and 1 guest