Thoughts, ideas on board building

Board building, design, technical innovations and new equipment. Post and discuss your latest creations, ideas, designs and builds here(Pictures not required LOL)

Moderator: BgSurfer

Post Reply
User avatar
Kiwy
Dirty
Posts: 238
Joined: Thu Jul 21, 2011 6:47 am

Thoughts, ideas on board building

Post by Kiwy » Mon Jan 19, 2015 4:56 pm

This year has written "new board" all over it. I'm tired of riding wood. I want to crash into mud and rain without the fear of soaking up layers.

Since I am prepared to shell out 3 months of work on it, maybe I can do something special. A while ago I drew a board to visualize my thoughts. It looked great but was critically flawed and really expensive to make.

A friend of mine asked me what did I do with those ideas. Well, nothing. But now I'm looking over to see if there's something salvageable.

Basically what I want is a drop through mountainboard without the nose and tail. Here's a deck shape example.(http://www.flickr.com/photos/37409476@N06/5902194854)

Its main use should be for riding streets, parks and ramps.

I'm thinking of getting nosno trucks and building a pair of hangers in the shape of an isosceles triangle to get the angle for turning. They should let the bushings pass through all the way through the board.

The first problem I see is wheel bite. I'm assuming the deck gets easier to spin and probably a bit stiffer but there may not be enough distance between your toes and the actual wheel. Maybe I can get a few more millimeters if I buy a trampa 35 long blank and chop it up. I could drill the binding holes a bit closer together but that would cut from my control and stability.

-----
The alternative is some light modding. I could put some new life in my matrix trucks by replacing the plastic hangers with the matrix lites or one from trampa. Maybe I'll add some white dampas. If i go with the trampa alternative I can buy a holy pro instead of a blank to be shaped.

-----
The quickest and cheapest (and probably most efficient) alternative though, is to buy a new deck, slap what I already have on it and call it a day.


I have a couple of months to think about it. Right now I don't know if I should risk a project.

User avatar
Daleyg3
Dirty
Posts: 219
Joined: Sun Feb 03, 2013 1:38 pm

Post by Daleyg3 » Thu Jan 22, 2015 9:24 am

Sounds like a Nompa.. a great inexpensive project. Lots of previous posts on making them.

User avatar
Kiwy
Dirty
Posts: 238
Joined: Thu Jul 21, 2011 6:47 am

Post by Kiwy » Sat Jan 24, 2015 3:08 pm

Yes I believe Nompas are really cool. I read all could find about them.
As long as I can find everything I need I'll attempt my own build.

User avatar
Joe'snewboard
Noob
Posts: 11
Joined: Fri Feb 12, 2016 8:18 am

Layers of foam to aluminium.

Post by Joe'snewboard » Fri Feb 26, 2016 10:52 am

I am currently working on joshpit2003's full suspension board. What I am doing is called the foam to aluminium. You can find it on grant Thompson king of random channel. Basically you use foam and sand to make your part. What I am doing is layering them to get max strength and act as stretch skin. Hope this helps, Joe.

User avatar
Flexboardz
Dirty
Posts: 250
Joined: Thu Oct 08, 2009 10:32 am

Post by Flexboardz » Sat Feb 27, 2016 4:32 am

Interessant. Do not hesitate to post news and pics...

User avatar
Joe'snewboard
Noob
Posts: 11
Joined: Fri Feb 12, 2016 8:18 am

Post by Joe'snewboard » Sat Feb 27, 2016 6:06 am

Ok I am go to start a thread called "full suspension board build." Later

Post Reply

Return to “The Shed”

Who is online

Users browsing this forum: No registered users and 6 guests