Page 1 of 1
Posted: Tue Mar 10, 2015 2:10 pm
Somehow it looks like a managed to lockup your other thread (link above) when I tried to post the embed code for your video.
To keep your previous thread alive, let's re-start/continue it in this thread:
You should build an electric version of this. Maybe even a single, powered rear wheel and two front wheels for steering instead of the standard trike.
I think the asthetics of old-school trikes and variants might be more appealing to the electric transportation market.
Flexboardz wrote:Thanks BgSurfer !
Can you please remind me the code to post youtube video on the forum?
(so I can post a video of the seated version of the Flexscoot)
Is this what you are wanting to post? Click share under your video at YouTube. Then click embed. Copy the embed code and paste it in your post.http://youtu.be/qzmzXegPluo
<iframe width="560" height="315" src="https://www.youtube.com/embed/qzmzXegPluo" frameborder="0" allowfullscreen></iframe>http://youtu.be/bVb3Hme6QGc
<iframe width="560" height="315" src="https://www.youtube.com/embed/bVb3Hme6QGc" frameborder="0" allowfullscreen></iframe>
<iframe width="560" height="315" src="https://www.youtube.com/embed/qzmzXegPluo" frameborder="0" allowfullscreen></iframe>
A few lines below the video frame you have three choices:Add to + Share < More ...
Click Share <
and you should get three more choices:Share Embed Email
Click on Embed
Copy the embed code -- in the box that displays when you click Embed
-- and paste it into the message box for posting here on this forum.
Posted: Tue Mar 10, 2015 2:52 pm
Thanks BgSurfer ! In fact it seems that it is my reply who caused the problem....
I am reallly sorry to have caused trouble to SurfingDirt forum. That's a big piece of board knowledge and I am a bit sad to see it deserted.
I hope electric board tinkerers will take the time to consult it, it will save them a lot of time
Posted: Wed Mar 11, 2015 8:02 am
Hopefully, anybody reading this thread will refer back to the following link:
Posted: Wed Mar 11, 2015 2:26 pm
Thanks for the link... it's funny how this thread got "frozen"...
Posted: Fri Mar 13, 2015 9:20 am
Pretty sure I locked it up when I tried to post the prefix and suffix of an embed code for you to see. That's why there is an empty box at the end of my last post in that thread. I should start another thread and see if I can freeze that one too.
"Onward Thru the Fog"
Posted: Fri Mar 13, 2015 9:24 am
Could your Flexboardz truck system be used for larger wheels with a wider track? That would create more ground clearance for a larger power plant and look more stable to the potential customer?
An electric trike concept has been something that has interested me for several years now -- originally I was thinking of a self-propelled ("tadpole" style) trike that leaned with turns.
Have you seen this?https://www.facebook.com/m3e.delivery.etrikehttps://vimeo.com/41967146
<iframe src="https://player.vimeo.com/video/41967146" width="500" height="281" frameborder="0" webkitallowfullscreen mozallowfullscreen allowfullscreen></iframe> <p><a href="https://vimeo.com/41967146">M3E, Deliver E Trike, Tilting Electric Trike</a> from <a href="https://vimeo.com/user11672713">Simon Williams</a> on <a href="https://vimeo.com">Vimeo</a>.</p>
Posted: Sat Mar 14, 2015 6:36 pm
Yes, the flex can be oversized... simply as you know it was first initially designed for boards format and stand up position...
I didn't know the E trike above. Having the legs controling the leaning is a very smart solution. I am surprized that this design had not more success.
We are working on a seated scooter too but but more targeted toward disabled/senior mobility.
For me, the interest of the flex design is to provide a simple/cheap solution for leaning wheels so it applies to small/cheap vehicles like boards or small electric vehicles...
For larger and/or more expensive vehicles, there are probably many other designs of leaning wheels, more sophisticated/expensive and adapted to this kind of market...
Finally, as you know, I have already enough difficulties to develop my boards/scoots to avoid to face big cat markets
Posted: Wed Oct 21, 2015 6:48 am
With the usual "few months of delays", we are glad to introduce our new Flexscoot models.
We are currently fine tuning the last details during a first production run and we will launch fully next month (website is under repair but you can follow flexscoot on facebook).
It will be also the opportunity to cast a new generation of Flexboardz.
Posted: Sat Oct 24, 2015 1:02 pm
Didn't you used to have a website that showed close-up pictures and/or diagrams of your lean tucks and their technology?
Do you have any pictures and/or diagrams of your truck technology that shows the mechanism and how it works? Would you be willing to post them? Or is all of this technology secret sauce?
I would really like to look at its potential for larger wheel trikes similar to one I posted earlier.
Posted: Sat Oct 24, 2015 1:50 pm
Flexboardz and flexscoot websites have both been hacked/virused/... and shut down. It used to be a lot of information about the flex techno on it.
I hope to get new plague-free websites very soon (with detailed info).
In any case, I am always happy to share information and collaborate with someone who want to develop the techno for specific application. Do not hesitate to contact me.
Posted: Sat Oct 24, 2015 7:11 pm
I just wanted to have a look to see if it might work for larger wheeled trikes.
Don't the money to build one at the moment. But would like to see what it might take to make one.
I hope to see your websites back on line soon.
Posted: Tue Oct 27, 2015 3:55 am
Flexscoot family :
Posted: Tue Jan 26, 2016 12:22 pm
You will have fun about me but think about wounded riders (or even old ex riders)....(I hope that the video will display correctly)
<iframe width="560" height="315" src="https://www.youtube.com/embed/wicUvjG8xhU" frameborder="0" allowfullscreen></iframe>
Posted: Tue Jan 26, 2016 1:19 pm
I think the concept has potential for the Boomers. Fun video. Don't think the music will reach them.
Seems like sitting on a bar for any amount of time would be uncomfortable.
Still want to have a look at your wheel tilt/lean mechanism. Could work well for a larger wheel trike. I still haven't seen many large wheel electric trikes in the market. I may not be looking hard enough though.
Posted: Tue Jan 26, 2016 1:29 pm
I like this "concept." I think your rear wheel (tilt/lift) is a simpler mechanism and likely easier to build.
Posted: Tue Jan 26, 2016 2:11 pm
Thanks for your advices, BGSurfer. I have another version with a more standard music.
I plan to propose a more comfortable seat... but the concept is not "a seat with wheels" but a "vehicle with a seat"... as it's much faster, you spend 4/5 times less in it... so it may be unnecessary to carry a full seat (weight/size/convenience).
You are right : the interest of "small electric vehicles" is to be cheap, light, simple (ie low tech like boards)