Water Kites Jumping On Land (Standing or w/ Board)

Helpful "how to" tutorials by our members. Mountainboard maintance, mods, rider tutorials and more. If there isnt already a tutorial on a subject you would like to know more about feel free to request one here.

Moderator: BgSurfer

Post Reply
User avatar
Posts: 15
Joined: Wed Jun 03, 2015 12:33 pm

Water Kites Jumping On Land (Standing or w/ Board)

Post by Kristian » Thu Jun 04, 2015 2:35 pm

Anyone know how to use a water kite to jump with a board or standing? I am trying not to get injured! I am pretty decent at flying 2 handled 4 string Power Kites, but a bar is new to me. Are there any techniques or videos on YouTube that could help?

Posts: 16
Joined: Wed Oct 29, 2014 11:43 am

Post by a-k-m » Tue Jan 05, 2016 5:05 am

You should probably get used to steering with a bar first.
Once you are comfortable kiting with a bar jumping comes almost naturally.
While riding left or right, steer the kite quickly to 12 o'clock or slightly in the opposite direction you are going and power the bar once it reaches that position. In order to land properly again steer the kite down again just right before landing.

The Kite will fly more quickly in the direction of zenith if you open the bar (push the bar away from you) which will lead to a higher jump height.

I noticed that it helps a lot with kite landboarding to actively jump of the ground when you are about to take off. (On water you would rather edge hard to increase the tension in the lines between you and the kite)

Hope that helps

Post Reply

Return to “How-To Forums”

Who is online

Users browsing this forum: No registered users and 1 guest